A Predictive Model for the Growth Diameter of Mold under Different Temperatures and Relative Humidities in Indoor Environments
Abstract
A substantial body of evidence suggests that indoor mold exposure is a cause of allergic and respiratory diseases in humans. While models exist for assessing the risk of mold growth on building materials, few study the characteristics of mold growth after germination. This study conducted mold growth experiments in a constant temperature chamber, using four temperature settings of 15, 20, 25 and 30 °C, and three relative humidities of 56 to 61%, 75 to 76% and 83 to 86%. A mold growth prediction model was established using temperature and relative humidity. The accuracy of the model was verified by comparing the sampling and the predicted values in a laboratory environment. The results indicated that reducing the environmental temperature and relative humidity could significantly inhibit the growth of mold, although the inhibitory effects varied. Temperature might play a more critical role. At higher temperatures (25 °C and 30 °C), the growth rate and lag time of mold tended to be consistent and there were differences in the maximum diameter. In the predictive model, the polynomial secondary model for the maximum growth rate and lag time and the Arrhenius–Davey secondary model for the maximum diameter (A) had good predictive effects (Adj.R2 > 0.850). It is speculated that temperature is the key factor affecting the maximum growth diameter of mold. The mold growth prediction model could better predict the growth of mold in actual environments without wind Adj.R2 > 0.800), but the accuracy of the model decreased under windy conditions (wind velocity < 1 m/s). The mold growth predictive model we established could be used to predict the growth characteristics of mold in windless environments. It also provides control suggestions for the regulation of temperature and relative humidity in indoor environments, supporting indoor thermal environment management and pollutant control, and ensuring indoor human health.
References (3)
- Prevalence and incidence of respiratory symptoms in relation to indoor dampness: the RHINE studyThorax · 2006
- Public health and economic impact of dampness and moldIndoor Air · 2007
- Characteristics of annual mold variations and association with childhood allergic symptoms/diseases via combining surveys and home visit measurementsIndoor Air · 2022
Related Papers
- Misalignment between Clinical Mold Antigen Extracts and Airborne Molds Found in Water-damaged HomesAnnals of the American Thoracic Society · 2021 · 2 shared tags
- Microbiological Analysis of Indoor Air in Selected Primary Schools: Health Concerns and RecommendationsJournal of Multidisciplinary Science MIKAILALSYS · 2023 · 2 shared tags
- Dampness, mould, onset and remission of adult respiratory symptoms, asthma and rhinitisEuropean Respiratory Journal · 2019 · 2 shared tags
- Microbial Air Quality in the Built Environment—Case Study of Darvas-La Roche Heritage Museum House, Oradea, RomaniaBuildings · 2023 · 2 shared tags
- Assessment of Mould Risk in Low-Cost Residential Buildings in Urban Slum Districts of Surakarta City, IndonesiaBuildings · 2023 · 2 shared tags
- Impact of positive pressure ventilation systems on indoor air quality in residential settingsBuilding and Environment · 2025 ·